Automatic bifold gates: motor and control
A 24 V DC brushless drive rated for five million cycles, with soft motion, self-locking and a manual release.
24 V brushless drive data
Model
DC-24V-200W
+RV63 reducer
Output power
120-200 W
Rated 200 W
Supply
24 V DC, 10 A
Current
6 A
Speed
1400 rpm
4 poles, class F
Reduction ratio
300
Operating time
6-12 s
Per opening
Service life
≥ 5,000,000
Cycles
Temperature
-30 to +70 °C
Humidity
≤ 85%
Altitude
≤ 1000 m
Warranty
1 year
7-day replacement on control system faults
Protection built into the drive
Soft start and soft stop reduce mechanical shock on hinges and panels. A thermal protector inside the motor prevents overheating during long or heavy use.
When stopped, the drive self-locks so the gate cannot be pushed open. In a power cut, the built-in clutch releases the motor for manual operation.
Commissioning in four moves
Full parameter table and error codes ship with the controller manual.
Set master and slave
For paired drives, set L-21 to 0 on the master and 255 on the slave.
Learn the limits
Hold Close for 2 seconds. The gate closes and the display returns to 190 when the close limit is learned.
Fine-tune positions
Use Enter plus Open, or adjust L-9 for opening angle and L-6 for closing position.
Pair remotes
Enter L-15, press any remote button, then save with Enter.
Ways to trigger the gate
License plate recognition, face and fingerprint readers, keypads, mobile app, video intercom, RFID cards, radar, ground loops and Bluetooth all connect to the controller. Signal lines only need to reach the master unit.
Need a specific control setup?
Tell us which readers or cameras you use. We will configure the controller before shipping.
Or email yifei@gmail.com
